IP-COM iUAP-AC-LITE 802.11ac Dual-Band Access Point ฿2,590
IP-COM Pro-6-LITE AX3000 Wi-Fi6 Dual-Band Access Point ฿3,790


802.11AX Dual-Band Long Range Access Point

  • Up to 3000 Mbps dual-band data rate
  • The new WPA3 encryption mode safeguards your network security
  • 2.4 GHz band 2×2 MIMO with a radio rate of 574 Mbps
  • 5 GHz band 2×2 MIMO with a radio rate of 2402 Mbps
  • Power input with 802.3at PoE

In Stock




Pro-6-LR    Overview

Pro-6-LR is designed based on the new Wi-Fi 6 technology. It realizes a bandwidth of 160 MHz and a 5 GHz rate as high as 2.4 Gbps, a rate three times higher than that of ordinary Wi-Fi 5 APs and two times that of ordinary Wi-Fi 6 APs. The application of such new technologies as OFDMA, spatial multiplexing, and MU-MIMO drives the network capacity of a single Pro-6-LR to 4 times higher. The high-power RF design helps maintain the quality of Wi-Fi signal even over a long distance, so that wireless clients and AP can work under the high-performance Wi-Fi 6 mode. Pro-6-LR is a perfect choice for such locations as businesses and hotels to deploy high-performance Wi-Fi networks. ProFi Controller makes it easy to manage and monitor the whole ProFi series in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.

3 Gbps Wi-Fi, 2.5 times higher rate

Both the 2.4 GHz and the 5 GHz radio bands support the new Wi-Fi 6 standard and the concurrent Wi-Fi rate is as high as 3 Gbps, 2.5 times that of the last-generation of AP (AC1200).

Higher capacity

Supporting OFDMA, SR, and MU-MIMO, 802.11ax greatly improves the system capacity compared with the last generation 802.11ac. With the TWT technology, AP can uniformly schedule the wakening and sleep of clients, significantly reducing client conflicts and unnecessary wakeups, and therefore is suitable for high-density crowd scenarios where large numbers of clients are deployed.

More than 20% wider Wi-Fi coverage

With the long OFDM symbol transmission mechanism and 2 MHz narrowband transmission, the 802.11ax protocol significantly reduces packet loss rate and noise interference, and improves the receiving sensitivity of clients. In addition, Pro-6-LR adopts a high-specification RF amplifying circuit, greatly widening the Wi-Fi coverage.

Strong anti-interference capability

Supporting BSS coloring, dynamic CCA threshold and power control, the 802.11ax protocol significantly reduces the channel interference in high-density scenarios and improves the utilization rate of spectrum resources, improving the anti-interference capability compared with 802.11ac.

Higher security

The Wi-Fi 6 AP supports the new-generation WPA3 Wi-Fi encryption protocol. Under the WPA3 encryption protocol, even the simple password cannot be cracked, greatly enhancing the security of Wi-Fi networks.

Intelligent roaming protocol

Supporting the intelligent roaming technology based on the 802.11kv protocol, Pro-6-LR enables wireless clients to automatically connect to AP with a better signal, effectively enhancing the user experience.

Standard PoE supported, easy installation and deployment

The efficient components and excellent hardware design guarantee the standard 802.3at power supply to 802.11ax dual-band gigabit AP, making installation and deployment simpler.

Centralized management

The ProFi Controller makes it easy to manage and monitor the whole ProFi series in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.

Product Information
Model Pro 6 LR
Category Ceiling
Dimensions Φ250.6*55 mm
Hardware Specifications
Frequency band 2.4 GHz, 5 GHz
Wireless standards IEEE 802.11a/b/g/n/ac/ax
2.4 GHz data rate 1-574 Mbps
5 GHz data rate 6-2402 Mbps
Channel width 20 MHz/40 MHz/80 MHz/160 MHz
Ethernet port One 10/100/1000 Mbps Ethernet Port
One 10/100/1000 Mbps Ethernet Port (PoE)
Button 1*Reset
LED indicator RGB
Max. power consumption 15.74 W
Power supply standard IEEE 802.3at PoE
Concurrent clients 254
Antenna gain 4*4 dBi
2.4 GHz Max. output power 29+/-1.5 dBm
5 GHz Max. output power 29+/-1.5 dBm
802.11b RX sensitivity -97 dBm
2.4 GHz 802.11n (MCS7) RX sensitivity -75 dBm
5 GHz 802.11a RX sensitivity -95 dBm
5 GHz 802.11n (MCS7) RX sensitivity -75 dBm
Software Specifications
Operating mode AP
Hide SSID Supported
Max. No. of SSID 2.4 GHz: 7 5 GHz: 4
OFDMA Supported
Beamforming Supported
TWT Supported
802.11 k/v Supported
WEP Supported
WPA Supported
WPA2 Supported
Access control MAC address-based
Adjustable power transmit Supported
Frequency analysis Supported
AP isolation Supported
Connected clients control Supported
RSSI threshold Supported
VLAN tagging for SSID Supported
LED indicator control Supported
Diagnostics tool Ping, Traceroute
Scheduled reboot Supported
Reboot at specified interval Supported
System logs Supported
Firmware upgrade Supported
Reboot Supported
Reset Supported
Backup configuration Supported
Restore configuration Supported
Operating Environment
Default login IP address
Default user name admin
Default password admin
Operating temperature -10℃ – 45℃
Operating humidity (10% – 90%) RH, non-condensing
Storage temperature -30℃ – 70℃
Storage humidity (10% – 90%) RH, non-condensing
  • The data on the above pages are all from IP-COM’s internal laboratory, obtained in a specific test environment, and the actual use may be slightly different due to individual differences in products, software versions and environments. Please refer to the actual use.
  • The product pictures and screen contents on the above pages are for illustration only. The actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to background, UI, and pictures) may be slightly different. Please refer to The real thing shall prevail.
  • Due to the real-time changes of product batches and production and supply factors, in order to provide accurate product information, specifications, and product characteristics as much as possible, IP-COM may adjust and revise the text descriptions, picture effects, etc. on the above pages in real time, in order to match the actual situation. Product performance, specifications, indexes, parts and other information are matched.
  • If it is necessary to make the above modifications and adjustments, no special notice will be given.
Facebook Comments Box




There are no reviews yet.

Be the first to review “IP-COM Pro-6-LR 802.11AX Dual-Band Long Range Access Point”

Your email address will not be published. Required fields are marked *

Your custom content goes here. You can add the content for individual product
Back to Top